wood grain paper in us
when applying sticker furniture, you should pay attention to the following aspects:
1. Treatment of the substrate: In general, the substrate used for stickers is mostly particle density board. If stickers are directly applied on the surface of these two types of boards, the problem of uneven pasting often occurs. Therefore, the substrate must be treated to make it smooth and flat. For example, apply water cement, scrape putty, spray PU or PE solid color primer, etc. on the board. The advantage of full application of water cement is low cost, and its disadvantage is mainly the problem of adhesion. Although putty solves the problem of adhesion with the substrate, we know that most of the putties on the market are single-component nitro putty, and from the perspective of paint matching, it is easy to cause the reaction with the upper polyester thinner and the bottom biting phenomenon. Spraying PU or PE solid color primer will not cause the above problems. Therefore, it is also the most popular at present.
2. Selection of paint: The effect of sticker furniture is good or bad. The first point is to look at its transparency, followed by color, fullness, hardness, feel, etc. If the transparency of the paint is not good, it will directly affect the clarity and appearance of the color. Therefore, it is most important to choose a paint with good transparency. For example,Amino Paper， Uncoated paper，Melamine Paper can recommmend to you.
3. Painting process: The quality of furniture and the effect depend not only on the quality of the board. The quality of the paint, but also on the selection of a reasonable painting process. Generally speaking, the process of painting sticker furniture can be divided into the following processes:
- White blank processing. Use 240#-320# sandpaper to polish, remove surface stains and make the surface smooth.
- Sealing. Use China Resources PS900 primer to seal, and polish after 3-4 hours.
- Polishing. Use 320# sandpaper to lightly polish to remove wood hair and thorns.
- Primer. Spray China Resources PU or PE solid color primer to achieve a certain fullness and covering power, without leaking the bottom, and polish after 5-8 hours.
- Polishing. Use 320# sandpaper to polish thoroughly and make it smooth and flat.
- Sticker. Use wood grain paper, and the sticker should be free of bubbles, wrinkles, neat and consistent, and primer should be applied after 24 hours of solid drying.
- Primer. Spray Huarun PU or PE transparent primer to achieve a certain fullness, and polish after 5-8 hours.
- Polishing. Use 400#-600# to polish flat and smooth, requiring no obvious sand marks and no bright spots.
- Color repair. Mix Huarun Shina or color essence with clear topcoat in proportion, spray, require uniform color, and polish after 8-10 hours of hard drying.
- Polishing. Use 800#-1000# sandpaper to lightly grind to remove surface particles.
- Glazing. Use Huarun clear topcoat, spray, require filtering, pay attention to dust prevention, and dry after 24 hours.